QuadGuard® M10 Modification

Report Number(s): NA

Description: The assembly drawing for the QuadGuard® M 10 has the wrong length bolt holding the pull out tabs on the front diaphragm.  2 in" long bolt is required lo provide full engagement of the nut threads during assembly.

Test Level: 3

Eligibility Letter: CC-112C

System Type: Impact Attenuator and Transitions

MASH Test Number: None

Proprietary/Non-proprietary: Proprietary

Pass/Fail: Pass

Evaluation: Engineering Analysis

Sponsor: Energy Absorption Systems Inc.

Test Article Description

Gating/Non-gating: Non-Gating

Category: Reusable