REBLOC 80SAH_4

Description: The vehicle restraint system with the system name REBLOC 80SAH_4 consists of factory produced precast elements. Each element is 4.033m (158,8 in) long, 0.3m (11.8 in) wide and 0.8m (31.5 in) high. The precast concrete elements have a cross section similar to an I-beam profile. The safety barriers are free standing. There is no anchorage to the ground, only the two terminal elements have to be anchored to the asphalt surface by using anchor bolts. The restraint function is achieved by connecting the individual elements to form a continuous chain. The connection between the elements is by the integrated tension bars, whose couplings, situation on the face side of each element, interlock. Steel shows which are an integrated part of the element, have mating projections and indentations that form a double tongue/groove system. The concrete barriers stand on two support feet with integrated elastomer pads on the underside. Situated at the top side of each element there are two galvanized lifting anchors.

Test Level: 3

Eligibility Letter: B-375

MASH Test Number: 3-11, 3-10

Proprietary/Non-proprietary: n/a

Pass/Fail: Pass

Evaluation: Full-Scale Crash Testing

Sponsor: REBLOC GmbH