Zoneguard® Portable Barrier

Report Number(s): NA


The test installation consisted of five barrier units, each unit nominally 50 ft in length, for a total length of approximately 250 ft. Each 50 ft long barrier unit was comprised of three sections (a male end section, a central section, and a female end section).Each barrier section was16 ft-8 in long and 31½ inch tall (without rubber pads) with a 27-9/16-in wide sloped base. The Zoneguard®barrier was installed on a 3-in thick asphalt pad with the traffic side edge of the base 8 in from, and parallel to, the edge of the existing concrete apron.

Test Level: 3

Eligibility Letter: B-343

Barrier Type: Each barrier section was 16 ft-8 in long and 31½ inches tall (without rubber pads) with a 27-9/16-inch wide sloped base

MASH Test Number: 3-10, 3-11

Proprietary/Non-proprietary: Proprietary

Pass/Fail: Pass

Evaluation: Full-Scale Crash Testing

Sponsor: Hill & Smith, Inc.

Test Article Description

Height: 31.5"

Section Length: 16' 8''

Connection Type: Four proprietary upper interlocking U-shaped channel speed joint connectors, with a sliding lock on one end

Ground Connection: Pinned