Dicke Safety Products DF3003S with 48″ x 48″ Roll-Up Sign

Report Number(s): TR-P41101-01-A

Description: The DICKE Safety Products DF3003S utilized a 48.0 in. (1.2 m) reflective square vinyl roll-up sign mounted at a height of 13.5 in. (4,115 mm) measured to the bottom corner of the sign. The device has a total weight of 29.8 lbs (13.5 kg). The device consists of a steel base with a double torsion spring system. Each of the sign's four (4) legs consist of two (2) telescoping sections constructed of 1.25 in. and 1.0 in. square aluminum tubing with 0.1 in. wall thickness. In the deployed state, the DF3003S has a footprint that measures 58 in. wide by 92 in. long. The vinyl roll-up sign is mounted to the mast via a fiberglass cross brace constructed of 1.25 in. (32 mm) wide fiberglass. The mast was constructed of three (3) sections. The lower section was constructed of 1.0 in. (25.4 mm) sq. aluminum tubing with 0.1 in (2.54 mm) wall thickness, the middle section was constructed of0.750 in. (19.05 mm) sq. steel tubing with 0.065 in (1.65 mm) wall thickness, and the top section was constructed of 1.25 in. (31.75 mm) sq. steel tubing. At the top of the mast 18 by 18 in. vinyl with¾ in. round wood dowel flags were mounted. The total sign height measured 81.5 in. (2.07 m).

Test Level: 3

Eligibility Letter: WZ-431

MASH Test Number: 3-71, 3-72

Proprietary/Non-proprietary: Proprietary

Pass/Fail: Pass

Evaluation: Full-Scale Crash Testing

Sponsor: Dicke Safety Products


Eligibility Letter WZ-431