MS 1000X Sign Stand with 48”x48” Vinyl Roll-up Sign

Report Number(s): NA

Description: The as-tested device consisted of one 48 in square vinyl roll up sign, one fiberglass cross brace assembly, one flag yolk, three flags, and one base assembly. The as-tested device weighed approximately 26 lb. The device had a height of 84 in measured to the top of the sign. It was tested with four 25 lb sand bags; one for each of its legs. The square vinyl roll-up sign was attached to a fiberglass cross brace and was set at a mounting height of 16 in measured to the bottom corner.

Test Level: 3

Eligibility Letter: WZ-416

MASH Test Number: 3-71, 3-72

Proprietary/Non-proprietary: Proprietary

Pass/Fail: Pass

Evaluation: Full-Scale Crash Testing

Sponsor: Ash Creek Manufacturing

Test Article Description

Mounting Height: 16"

Base Type: Yielding

Support Type: Perforated Square Tube

Support Size: NA

Sign Material: FRP (Fiberglass Reinforced Plastic)

Sign Type: Diamond

Sign Size: 48" x 48"

Number of Legs: 4